Contractor Rate vs Employee Salary: The Real Comparison
SalaryvsContract

Contractor Rate vs Employee Salary: The Real Comparison

A $60 an hour contract sounds far better than a $75,000 salary. Once you subtract payroll tax, the benefits you give up, unpaid holidays and gaps between gigs, the gap shrinks fast. Here’s the full math for 1099 and W2 contracts.

By hourlytosalarycalculatorsUpdated October 29, 202611 min read
A balance scale weighing a $75,000 salary with benefits against a $60 an hour contract, tipping slightly toward the contract SALARY $75,000 + BENEFITS CONTRACT $60/h TAX + GAPS Which is worth more?
Short answer

What contract rate matches a $75,000 salary?

Salaried employee$36.06an hour on paper, $75,000 a year with benefits
W2 contract break even$48.77an hour, 1.35 times the salary rate
1099 contract break even$54.72an hour, 1.52 times the salary rate

These break even rates assume the job comes with $7,000 a year of employer health coverage and a 4% retirement match, and that the contractor bills 1,760 hours a year after 5 weeks of unpaid time off and 3 weeks between contracts. Change any of those and the answer moves, which is why the calculator below matters.

Hidden value

What a salary includes that a contract rate doesn’t

A salary figure is only part of what an employer spends on you. In June 2026, private employers paid an average of $32.82 an hour in wages and $14.07 in benefits, so benefits made up 30% of total compensation (BLS).

An iceberg: the salary is the visible tip, while paid time off, health insurance, retirement match, the employer half of payroll tax, unemployment insurance and steady work sit below the waterline Salary Paid holidays and vacation Employer health insurance Retirement match Employer half of payroll tax (7.65%) Unemployment and workers’ comp Steady, guaranteed hours What you see in the offer What a contractor has to replace or go without Benefits = 30% of pay
1099 vs W2

Employee, W2 contractor or 1099 contractor?

“Contractor” can mean 2 very different setups. A W2 contractor is an employee of a staffing agency, usually without benefits. A 1099 contractor is self employed and runs their own small business.

Salaried employeeForm W2 from the employer
  • Employer pays half of payroll tax
  • Health insurance and retirement match
  • Paid holidays and vacation
  • Unemployment and workers’ comp
  • Usually lower hourly equivalent
W2 contractorForm W2 from an agency
  • Agency pays half of payroll tax
  • Overtime after 40 hours if non exempt
  • Benefits limited or optional
  • Unpaid holidays and time off
  • Work ends when the contract ends
1099 contractorForm 1099 NEC from each client
  • Pays full 15.3% self employment tax
  • Buys own health insurance
  • No overtime, unpaid time off
  • Deducts business expenses
  • Sets own rates and clients
Worked example

$75,000 salary vs $60 an hour on contract

Yearly figuresSalariedW2 contract1099 contract
Paid hours2,0801,7601,760
Gross pay$75,000$105,600$105,600
Business expenses$0$0$4,000
Social Security and Medicare you pay$5,738$8,078$14,356
Employer health coverage$7,000$0$0
Retirement match (4%)$3,000$0$0
Comparable value$79,263$97,522$87,244
Compared with the salaryBaseline+$18,259+$7,982

Comparable yearly value

Before income tax, after payroll tax, expenses and benefits you’d have to buy
Salaried$75,000 + benefits$79,263
1099 contract$60/h, 1,760 h$87,244
W2 contract$60/h, 1,760 h$97,522

The contract wins here, but by far less than the $30,600 difference in gross pay. The 1099 contractor keeps only about $8,000 more, and that’s before counting the risk of a longer gap between contracts. Every extra unpaid week costs $2,400 at $60 an hour.

!

“Comparable value” counts the employer’s health and retirement contributions as part of the salaried package, since a contractor would have to pay for similar coverage and savings. Income tax is left out because both sides pay it at similar rates.

Break even

The break even rule of thumb

W2 contract× 1.35the salary’s hourly rate to break even
1099 contract× 1.52the salary’s hourly rate to break even

Divide the salary by 2,080 for its hourly rate, then multiply. For our $75,000 job: $36.06 × 1.52 = $54.72 for a 1099 contract. These multipliers come from our example; richer benefits, more paid time off or longer gaps push them higher.

SalaryHourly equivalentW2 contract break even1099 contract break even
$50,000$24.04$32.45$36.54
$60,000$28.85$38.94$43.85
$75,000$36.06$48.68$54.81
$100,000$48.08$64.90$73.08
$125,000$60.10$81.13$91.35

Quick estimates using the 1.35 and 1.52 multipliers, so the $75,000 row differs from the exact figures by a few cents. Use the calculator for your own numbers. For a deeper look at setting a 1099 rate from scratch, see how to set your freelance hourly rate.

Calculator

Contractor vs employee calculator

Enter the salaried offer on the left and the contract on the right. The calculator compares their real yearly value and finds the contract rate that breaks even.

VS

Which offer is worth more?

Salary with benefits vs a W2 or 1099 contract

Salaried job
Contract

Compare your offers

Enter both offers to see which is worth more.

Salaried$0
Contract$0
Contract gross a year$0
Payroll tax on contract$0
Salary per hour worked$0
Break even contract rate$0

Self employment tax is 15.3% on 92.35% of net earnings; W2 contractors pay 7.65%. The Social Security wage base ($184,500 in 2026) is applied. Unpaid weeks include holidays, vacation and gaps between contracts. Overtime is paid at 1.5× for W2 contracts only. Income tax is not included.

Beyond money

Factors the hourly rate doesn’t show

Income stabilityContracts end. Budget for gaps, and keep a larger emergency fund than you would on salary.
Safety netEmployees are usually covered by unemployment insurance and workers’ comp. 1099 contractors usually aren’t.
OvertimeHourly W2 workers usually earn time and a half after 40 hours. 1099 contractors don’t; long weeks pay straight time.
Taxes and paperwork1099 contractors pay quarterly estimated tax and keep business records, but can deduct expenses and may qualify for the qualified business income deduction.
Earning potentialContractors can raise rates, take more clients and bill more hours. Salaries grow mostly through yearly raises.
ClassificationIf a client controls when, where and how you work the way a boss would, you may legally be an employee. The IRS and Department of Labor look at control and independence.

Wondering whether a salaried role would even pay overtime? See exempt vs non exempt employees.

Negotiating

How to negotiate a contract rate

Start from your break even

Know the rate that matches your current or offered salary before any conversation. It’s your floor.

Ask how many hours are guaranteed

A high rate with uncertain hours can be worth less than a lower rate for a full year.

Ask what’s included

On W2 contracts, check for health plans, paid holidays and overtime. On 1099 work, check payment terms and who covers expenses.

Price in risk

Short or uncertain contracts deserve a higher rate than long, stable ones.

Compare total yearly value

Use the calculator above, and our guide to comparing an hourly offer with a salaried one.

i

Converting a contract to a salary? Agencies often charge clients well above what they pay the contractor. If a client wants to hire you directly, your break even rate gives you a strong anchor for the salary conversation.

Questions

Frequently asked questions

How do I compare a contractor rate to a salary?

Multiply the rate by the hours you’ll bill in a year, subtract business expenses and the extra payroll tax, then compare it with the salary plus the employer benefits you’d give up.

What contractor rate equals a $75,000 salary?

In our example, about $54.72 an hour for a 1099 contract and $48.77 for a W2 contract, with $7,000 of employer health coverage, a 4% match and 1,760 billed hours.

Is 1099 or W2 contract pay better?

At the same rate, W2 is usually worth more because the agency pays half of Social Security and Medicare. A 1099 contractor pays 15.3% self employment tax but can deduct business expenses.

How much more should a contractor make than an employee?

To break even, a 1099 contractor often needs about 1.4 to 1.6 times the employee’s hourly wage, depending on benefits, time off and gaps. Many aim higher to come out clearly ahead.

Do contractors get overtime?

1099 contractors aren’t covered by federal overtime rules. Hourly W2 contract workers are usually non exempt agency employees and get time and a half after 40 hours.

What benefits do employees get that contractors don’t?

Usually employer health insurance, retirement matches, paid holidays and vacation, the employer half of payroll tax, unemployment insurance and workers’ comp. Benefits are about 30% of private employers’ compensation costs.

Calculators

Related guides: how to set your freelance hourly rate, salary vs hourly and gross vs net pay.

Sources

  1. BLS: compensation costs for private industry workers, June 2026
  2. The Tax Adviser: 2026 Social Security wage base and self employment tax
  3. Journal of Accountancy: 2027 Social Security wage base

The example uses illustrative benefits, expenses and unpaid weeks. Your results depend on your offers, state and tax situation. This guide is general information, not tax or legal advice.